Skip Ribbon Commands
Skip to main content
Sign In
Navigate Up

26277 ECMO Blood Gas, Arterial On Pump

ECMO Blood Gas, Arterial On Pump
Test Code: ABGELS
Test Components

​Panel includes Blood Gas (pH, partial pressure of carbon dioxide pCO2, partial pressure of oxygen pO2, bicarbonate HCO3, base excess BE, O2 Saturation)

Useful For

​Useful in determining arterial oxygen saturation of the patient during certain procedures such as ECMO or heart surgery. 

Specimen Requirements
Fasting RequiredSpecimen TypePreferred Container/TubeAcceptable Container/TubeSpecimen VolumeSpecimen Minimum Volume
(allows for 1 repeat)
​No​Whole Blood​Balanced Heparin Syringe1 mL​0.5 mL
Collection Processing Instructions

​For use by ECMO or surgery ONLY.  Specimen is obtained from the ECMO Pump.  Specimen must arrive within 30 minutes of draw. If blood gas analysis will not be performed within 30 minutes after specimen collection, transport sample in a cold pack or prepare a container with ice water capable of maintaining refrigerated temperatures and large enough for immersion of the barrel of the capped/sealed syringe.

 

Specimen Stability Information
Specimen TypeTemperatureTime
​Whole Blood ​​Ambient​30 minutes
​On Cold Pack​45 minutes
Rejection Criteria
Clotted Sample
​Mislabeled/Unlabeled specimens
​Other anticoagulants such as EDTA, citrate, oxalate, and fluoride
Performing Laboratory Information
Performing LocationDay(s) Test PerformedAnalytical TimeMethodology/Instrumentation
​Marshfield​Monday through Sunday​< 2 hours​GEM 4000
Reference Range Information
Performing LocationReference Range
​Marshfield ​ ​ ​ ​ ​​EpH:  7.35 - 7.45
​EpCO2:  35 - 45 mmHg

​EpO2:  80 - 200

​EHCO3:  22 - 28 mmol/L
​EBE:  -3.0 - 3.0 mmol/L
​EO2SAT:  94 - 99%
Test Components

​Panel includes Blood Gas (pH, partial pressure of carbon dioxide pCO2, partial pressure of oxygen pO2, bicarbonate HCO3, base excess BE, O2 Saturation)

Ordering Applications
Ordering ApplicationDescription
If the ordering application you are looking for is not listed, contact your local laboratory for assistance.
Specimen Requirements
Fasting RequiredSpecimen TypePreferred Container/TubeAcceptable Container/TubeSpecimen VolumeSpecimen Minimum Volume
(allows for 1 repeat)
​No​Whole Blood​Balanced Heparin Syringe1 mL​0.5 mL
Collection Processing

​For use by ECMO or surgery ONLY.  Specimen is obtained from the ECMO Pump.  Specimen must arrive within 30 minutes of draw. If blood gas analysis will not be performed within 30 minutes after specimen collection, transport sample in a cold pack or prepare a container with ice water capable of maintaining refrigerated temperatures and large enough for immersion of the barrel of the capped/sealed syringe.

 

Specimen Stability Information
Specimen TypeTemperatureTime
​Whole Blood ​​Ambient​30 minutes
​On Cold Pack​45 minutes
Rejection Criteria
Clotted Sample
​Mislabeled/Unlabeled specimens
​Other anticoagulants such as EDTA, citrate, oxalate, and fluoride
Useful For

​Useful in determining arterial oxygen saturation of the patient during certain procedures such as ECMO or heart surgery. 

Test Components

​Panel includes Blood Gas (pH, partial pressure of carbon dioxide pCO2, partial pressure of oxygen pO2, bicarbonate HCO3, base excess BE, O2 Saturation)

Reference Range Information
Performing LocationReference Range
​Marshfield ​ ​ ​ ​ ​​EpH:  7.35 - 7.45
​EpCO2:  35 - 45 mmHg

​EpO2:  80 - 200

​EHCO3:  22 - 28 mmol/L
​EBE:  -3.0 - 3.0 mmol/L
​EO2SAT:  94 - 99%
For more information visit:
Performing Laboratory Information
Performing LocationDay(s) Test PerformedAnalytical TimeMethodology/Instrumentation
​Marshfield​Monday through Sunday​< 2 hours​GEM 4000
For billing questions, see Contacts
For most current information refer to the Marshfield Laboratory online reference manual.